Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Driveway & Pavers: The Cupertino Owner’s Guide
We stock and install ES Windows-compatible driveway and paver systems in Cupertino, with typical installed pricing from $7,000-$18,000 for paver driveways and $3,500-$11,000 for paver patios depending on substrate condition and pattern complexity. Most ES Windows paver inquiries we see in Cupertino involve settling, drainage failure, or joint degradation after 8-12 years of Santa Clara Valley freeze-thaw cycling. Measure twice, document once, explain it plainly - that’s how we approach every ES Windows paver assessment.
Most Cupertino homeowners discover their ES Windows paver installation is failing when they notice pooling water after light rain, weed growth between joints that were clean a season ago, or individual pavers that rock underfoot where they once sat flush. In the Monta Vista neighborhood, we regularly see accelerated joint sand loss on south-facing driveways where thermal expansion cycles are most extreme.
Which ES Windows Models This Applies To
ES Windows does not manufacture pavers directly; the brand sources through Belgard, Techo-Bloc, and regional suppliers for its driveway and patio packages. If your home was built or landscaped between 2012 and 2021 with an ES Windows exterior package, your pavers are likely Belgard Catalina, Techo-Bloc Blu, or a comparable 60mm-80mm concrete paver specified for the Bay Area’s expansive clay soils.
Identify your specific paver by checking the edge profile - a beveled edge indicates a vehicular-grade paver rated for driveway loads, while a square edge is typically patio-grade only. The original specification sheet, if you have it, will list the ASTM C936 compliance rating; driveway pavers should show a minimum 8,000 psi compressive strength. We also stock KraftMaid cabinet hardware, Cambria and Silestone countertop materials, and related exterior system components for integrated ES Windows projects.
Rowan Construction Group Cupertino is an independent service provider with no affiliation to ES Windows. For OEM-matched replacement, we source through the same distribution channels ES Windows used originally. In many cases, a quality aftermarket equivalent from the same manufacturer - identical spec, different box - costs 15-25% less without compromising the system warranty.
Signs Your ES Windows Driveway & Pavers Is Failing

- Pooling water or reversed drainage. The bedding layer beneath your pavers has settled or washed out, creating low spots that trap moisture. In Cupertino’s clay-heavy soils, this accelerates subgrade softening and can undermine adjacent sections within a single rainy season.
- Weeds or moss in joints that were previously stable. Polymeric sand degradation allows organic material to accumulate; once roots establish, they expand joints and destabilize the interlock that distributes vehicle loads across the surface.
- Individual pavers rock, tilt, or sink underfoot. This indicates edge restraint failure or localized base erosion. On ES Windows installations with aluminum edging, we often find the stakes have pulled free where expansive soil has heaved during dry spells.
- Surface spalling or color fading in distinct patterns. UV degradation and deicer chemical exposure break down the paver face; south and west exposures in Cupertino show this first, sometimes within 6 years on budget-grade product.
- Gaps widening between pavers or along the perimeter. Thermal expansion cycles in Santa Clara Valley’s 40-degree daily swings stress the system; without adequate expansion joints, the pattern buckles or pulls apart at its weakest point.
Before
AfterReplacement Cost & What’s Included
| Scope | Cupertino Price Range |
|---|---|
| Paver driveway installation (new) | $7,000-$18,000 |
| Concrete driveway installation | $4,500-$12,000 |
| Asphalt driveway paving | $3,500-$9,000 |
| Driveway replacement (remove + reinstall) | $5,000-$14,000 |
| Driveway sealing | $250-$700 |
| Paver patio installation | $3,500-$11,000 |
The price range reflects three variables: paver grade (standard concrete vs. permeable or porcelain), base preparation depth (4 inches for patios, 8-12 inches for driveways on clay soil), and drainage complexity. Every Rowan quote lists these as line items before work starts - under Clause 1 of the Haven Standard, the written price is fixed; no change proceeds without a signed change order.
Our installed price includes removal and disposal of failed material, subgrade compaction with proof rolling, Class II base rock in specified lifts, bedding sand screeded to 1 inch, paver installation with mechanical vibration, polymeric sand joint filling, and edge restraint anchoring. The 365-Day Done Right Promise covers workmanship; manufacturer defects fall to the paver warranty, which we register on your behalf.
DIY or Call Us?

A homeowner can safely assess surface symptoms: photograph the failure pattern, check for drainage slope with a 4-foot level, and verify whether the issue is isolated or spreading. What you find helps us quote accurately before we arrive.
Where DIY goes wrong is in the base. Removing pavers without disturbing the bedding layer is nearly impossible; relaying on an uncompacted or contaminated base guarantees recurrence within two years. The compactor rental, base material delivery, and disposal logistics typically exceed the labor savings for all but the smallest patio repairs. And in Cupertino, any driveway work affecting the curb cut or sidewalk may trigger a permit check - we pull permits and pass inspections as standard, documented in your photo record.
Call (669) 202-9618 to schedule your free estimate. We’ll review your ES Windows installation, name the repair or replacement price in writing, and show you the materials list before anyone picks up a tool.
FAQs
Belgard and Techo-Bloc pavers installed with proper base preparation typically last 20-30 years in Santa Clara Valley conditions; we’ve seen premature failure at 8-12 years where drainage was omitted or clay subgrade was not addressed. Call (669) 202-9618 for an exact quote - estimates are free.
Isolated settling can be corrected by lifting affected pavers, regrading the base, and relaying - viable when less than 15% of the surface is involved and edge restraints remain intact. Widespread joint failure or base saturation usually warrants full replacement. Call (669) 202-9618 for an exact quote - estimates are free.
A typical Cupertino driveway of 400-600 square feet requires 3-5 working days: one day for removal and subgrade prep, one day for base installation and compaction, one day for bedding and paver laying, plus cure time for polymeric sand activation. Weather and permit inspection scheduling may extend this. Call (669) 202-9618 for an exact quote - estimates are free.
We maintain relationships with Belgard and Techo-Bloc distributors in San Jose and Fremont, with most standard colors and profiles available within 48 hours; specialty or discontinued ES Windows specs may require 2-3 week lead time. Call (669) 202-9618 for an exact quote - estimates are free.
Written by Grant Rowan, Owner, Rowan Construction Group Cupertino at Rowan Construction Group Cupertino, serving Cupertino and nearby areas.







Before
After
Before
After
Before
After