Tremron Home Additions & ADU Nationwide

Tremron Home Additions & ADU: The Cupertino Owner’s Guide

We stock and install Tremron-compatible hardscape components for home additions and ADU projects throughout Cupertino, with typical installed pricing for Tremron-integrated work running $45,000-$130,000 depending on scope. Most homeowners discover their Tremron pavers, retaining wall blocks, or fire pit elements need attention when settling or drainage issues appear after winter rains, or when an ADU slab shows cracking where Tremron edging was meant to control expansion. In Cupertino’s clay-heavy Monta Vista and Rancho Rinconada soils, we’ve seen Tremron Olde Towne pavers shift after three to five seasons if the base prep skipped geotextile fabric, which is the spec we follow on every job.

Call (669) 202-9618

Which Tremron Models This Applies To

Tremron manufactures several product lines relevant to Cupertino home additions and ADUs, and matching the right component matters for load-bearing capacity and freeze-thaw resistance. The Olde Towne series, Avenue series, and Stonehurst retaining wall system are the three we encounter most often in Santa Clara County projects. Olde Towne pavers run 2 3/8 inches thick in standard and permeable profiles; Avenue pavers are 2 3/4 inches, rated for vehicular traffic, which we specify when an ADU driveway ties into the main home’s approach. Stonehurst wall units come in 6-inch and 8-inch heights, with a pinned connection system that fails if the wrong pin diameter is substituted.

Identification starts with the stamped model code on the paver edge or the wall unit’s back face. Tremron color codes are two-letter abbreviations - SA for Sierra, CT for Coastal Tan - followed by a batch number. For pavers installed before 2019, check the chamfer edge: Tremron switched from a micro-chamfer to a full 3/16-inch chamfer that year, and matching replacement stock requires this detail. We source OEM Tremron direct from their Florida distribution network, with a seven- to ten-day lead time for non-stock colors; for common Sierra and Coastal Tan, we keep pallet quantities on hand in our San Jose warehouse.

Aftermarket equivalents exist from Belgard and Techo-Bloc, but we caution against mixing manufacturers on the same plane - the dimensional tolerances differ by up to 1/8 inch, enough to telegraph through sand-set installations. Under Clause 1 of the Haven Standard, we quote both options with the compatibility risk noted in writing.

Signs Your Tremron Home Additions & ADU Is Failing

• Pavers rocking or sounding hollow underfoot. The bedding sand has eroded or the base layer has settled, often where downspouts dump concentrated flow. In Cupertino, this shows first at the low point of an ADU walkway where Monta Vista’s decomposed granite subsoil doesn’t percolate fast enough.
• Edge restraint pulling away from the field. The plastic or concrete edging that locks the perimeter has lost spike anchorage, usually because the installer’s 10-inch spikes hit a buried utility sleeve or tree root and were shortened rather than relocated. The whole field migrates outward within two rainy seasons.
• Retaining wall leaning or stair-step cracking. Tremron Stonehurst walls rely on granular backfill and a buried base course; when contractors backfill with native clay, hydrostatic pressure builds behind the wall during Cupertino’s January through March wet period. We find this most often on ADU perimeter walls where the original builder treated the wall as decorative rather than structural.
• White efflorescence blooming across paver faces. Calcium hydroxide migration from the concrete substrate, accelerated by Tremron’s pigmented surface layer being more porous on early-production runs (2015-2017). It’s cosmetic but persistent; sealing traps moisture and worsens it, so we specify a different remediation.
• Fire pit ring cracking or spalling. Tremron fire pit kits use a high-heat concrete mix rated to 1,200 degrees Fahrenheit, but homeowner-installed burner assemblies often exceed this with propane upgrades. The thermal shock separates the concrete from the aggregate, and the ring fails in quarter sections.

Before

After

Replacement Cost & What’s Included

What drives the range: access for equipment (backyard ADUs in Rancho Rinconada often need mini-excavator rental through 36-inch gates), soil condition requiring imported base rock, and whether we hit the native clay layer at 18 inches or 30 inches. Every quote is a flat written price with line-item materials, labor, and permit costs - no call-for-pricing, no open-ended allowances. Our 365-Day Done Right Promise covers the installation; Tremron’s material warranty runs 25 years on structural cracking for pavers, which we register on the homeowner’s behalf.

DIY or Call Us?

There’s a safe middle ground for Tremron paver issues, and a hard stop. An owner can check whether edge restraints are spiked at 6-inch intervals, whether joints are topped with polymeric sand (it should feel rigid, not loose), and whether downspouts terminate with splash blocks rather than dumping directly on the field. These are visual checks that tell you whether the original install followed Tremron’s published spec.

Where DIY goes wrong: lifting settled pavers without checking the base layer thickness and compaction. Tremron specifies 4 inches of compacted crushed aggregate base for pedestrian areas, 6 inches for vehicular - but Cupertino’s clay soils often need 8 inches plus geotextile to prevent pumping. Relaying pavers on the same failed base buys one season before the same rocking returns. Retaining wall rebuilds involve live load calculations and, for walls over 30 inches, Santa Clara County requires engineered plans and inspection - we pull those permits as standard.

We’re not affiliated with Tremron; we’re an independent contractor that sources their product and installs to their spec, plus the soil amendments their Florida-based engineering doesn’t account for. Call (669) 202-9618 to schedule your free estimate - we’ll photograph the condition, measure the base, and deliver a written price before any work starts.

FAQs