Therma-Tru Driveway & Pavers Nationwide

Therma-Tru Driveway & Pavers: The Cupertino Owner’s Guide

We stock and install Therma-Tru-compatible driveway pavers and entry systems in Cupertino, with most replacement and repair projects running $5,000-$14,000 for driveway replacement and $3,500-$11,000 for paver patio work depending on substrate condition and square footage. Therma-Tru parts are typically available same-day through our supplier network, and we carry common edge restraints, permeable joint fillers, and matching color lots on our trucks. Most Cupertino homeowners discover the problem after rain - water pooling where it didn’t before, or pavers that have shifted enough to catch a shoe.

Call (669) 202-9618

Which Therma-Tru Models This Applies To

Therma-Tru does not manufacture pavers directly; the brand’s driveway and hardscape systems are built around Belgard and Techo-Bloc paver lines that Therma-Tru specifies for integrated entry and walkway projects. If your home was built between 2015 and 2022 in Cupertino, check for a specification sheet in your garage or utility room - the paver series is usually listed as Belgard Cambridge Cobble, Mega-Arbel, or Techo-Bloc Blu 80, with color codes like “Sandlewood” or “Chestnut Brown” that were matched to the Therma-Tru entry door stain.

The critical compatibility gotcha: Therma-Tru-specified installations from 2018-2020 used a 60mm paver thickness on residential driveways, which fails faster under the weight of modern EVs. Current spec calls for 80mm. We verify this with a core sample before quoting. OEM color-matched replacements come from the original supplier lot when possible; when lots are discontinued, we source from aftermarket inventory with spectrophotometer matching, noting the variance in writing before work starts. Under Clause 1 of the Haven Standard, that written scope includes the paver source, thickness, and any color deviation.

Signs Your Therma-Tru Driveway & Pavers Is Failing

• Water pooling in lanes that previously drained clean. The bedding sand layer has washed out or compacted unevenly, breaking the pitch that Cupertino’s clay-heavy soils demand. Left alone, the freeze-thaw cycle (yes, even here, December through February) opens cracks in the substrate.
• Pavers rocking underfoot or sounding hollow when tapped. The edge restraint - typically a plastic or aluminum spike-in system - has pulled free from expansion and contraction. Therma-Tru specs from 2016-2019 used a lighter-gauge restraint that degrades faster in south-facing Cupertino exposures.
• Weeds growing through joints that were previously tight. The polymeric sand has eroded, which happens faster on sloped Monta Vista and Rancho Rinconada lots where irrigation runoff carries it away. This is cosmetic until it becomes structural.
• Chipped or spalled surface texture, especially at the garage threshold. Therma-Tru’s specified tumbling process creates a worn look, but the 60mm pavers from the 2018-2020 spec period lack the compressive strength (8,500 PSI vs. current 10,000 PSI) for sustained vehicle loading.
• Sunken bands parallel to the garage or street edge. The aggregate base was likely installed at 4 inches instead of the 6-inch minimum over clay soils, or the geotextile fabric was omitted. We’ve found this on five Cupertino rebuilds in the past two years, all from the same production builder.

Before

After

Replacement Cost & What’s Included

The range depends on three things we document before quoting: square footage, whether the existing base is salvageable (we test with a dynamic cone penetrometer), and paver availability from the original lot or matched substitute. Every quote is a flat written price with line-item materials - no call-for-pricing, no allowance categories that balloon later. The 365-Day Done Right Promise covers settling, joint failure, and edge restraint pullout. We pull permits when the scope triggers Cupertino’s paving ordinance, and we pass inspection before final payment.

DIY or Call Us?

What you can safely check: lift one paver at the failure edge and measure the base depth with a ruler. Four inches or less over clay soil explains the sinking. Check for a specification sheet in your garage - the paver series and color code speed our matching process enormously.

Where DIY goes wrong: driveway pavers over 200 square feet require plate compaction in lifts, and the plate compactor (rental, 150 lbs plus) will destroy an improperly set edge restraint. Worse, the polymeric sand activation - wet, wait, sweep, repeat - is temperature-sensitive; Cupertino’s afternoon wind in May and June flash-dries the surface before the binder sets, leaving a haze that’s nearly impossible to remove. We’ve been called to three homeowner attempts this year, all costing more to correct than our original quote would have run.

Call (669) 202-9618 to schedule your free estimate. We bring paver samples, measure the base, and deliver a written price before anyone picks up a tool.

FAQs