Tamko Driveway & Pavers Nationwide

Tamko Driveway & Pavers: The Cupertino Owner’s Guide

We stock and install Tamko-compatible driveway and paver systems in Cupertino, with paver driveway installations typically running $7,000-$18,000 and concrete driveway work at $4,500-$12,000 depending on substrate condition and square footage. Most Tamko paver pattern replacements and driveway section repairs can be assessed same-day, and we carry common Tamko edge restraints, bedding sand specs, and paver units on our trucks for the Monta Vista and Rancho Rinconada areas. Cupertino homeowners usually discover the failure when settling creates a trip hazard at the garage transition, or when winter rains pool where the bedding layer has washed out beneath the pavers.

Call (669) 202-9618

Which Tamko Models This Applies To

Tamko’s paver and hardscape line centers on the Appian, Bristol, and Heritage series, with the Appian stone being the most common install we encounter in Cupertino’s 95014 and 95015 zones. To identify your specific unit, look for the stamped manufacturing date and series code on the paver edge, usually visible on the narrow side of a lifted corner unit. The Appian series runs 2-3/8″ thick and interlocks on a modified herringbone; Bristol is thinner at 2-1/16″ and uses a different edge spacing, so edge restraint replacements are not cross-compatible.

OEM Tamko pavers match color lots from the original manufacturing run, which matters for repairs larger than a few square feet, because the iron oxide pigments weather differently between batches. For smaller repairs, we source quality aftermarket equivalents from Belgard and Techo-Bloc, both brands we stock alongside our fifty-plus vetted material lines, and we document the color variance in writing before work starts so you see the match under your specific Cupertino light conditions. Measure twice, document once, explain it plainly.

Signs Your Tamko Driveway & Pavers Is Failing

• Pavers rocking or sounding hollow underfoot. The bedding sand layer has eroded or compacted unevenly, often from poor initial screeding or water intrusion through failed edge restraints. In Cupertino, the clay-heavy soils off McClellan Road accelerate this when drainage is undersized.
• Visible settling at the garage slab or walkway threshold. The aggregate base has consolidated or washed out, creating a lip that catches car tires and trip hazards. We see this most where the original install skipped geotextile fabric separation.
• Weeds growing through joints despite recent polymeric sand. The sand bed has degraded to the point that organic material is accumulating in the joint voids, meaning the interlock is compromised and load distribution is failing.
• Chipped or spalled paver corners, especially near the driveway mouth. Tamko’s Appian series holds up well to residential vehicle loads, but repeated impact from delivery trucks or RV cornering will fracture the chamfer edge where the bedding is thin.
• Standing water 24 hours after rain. The pitch has reversed due to base settlement, or the original screed was too flat for Cupertino’s occasional heavy winter cells. This accelerates freeze-thaw damage even in our mild climate and breeds mosquitoes in spring.

Before

After

Replacement Cost & What’s Included

For Tamko paver driveway replacement in Cupertino, expect $7,000-$18,000 installed; concrete driveway replacement runs $5,000-$14,000; and isolated paver patio section repair falls between $3,500-$11,000 depending on access and how many square feet need lifting. The range moves with four factors: how much existing base can be salvaged, whether we need to match a discontinued Tamko color lot, the complexity of the pattern (circular inlays add labor), and whether the original edge restraint was plastic (fails faster) or concrete (usually reusable).

Every quote is a flat written price with line-item parts and labor, delivered before anyone picks up a tool. Under Clause 1 of the Haven Standard, that number does not change unless you sign a change order. Our 365-Day Done Right Promise covers the installation, and you receive a documented photo record of the excavated base condition, the new bedding layer depth, and the finished surface pitch, included as standard.

DIY or Call Us?

An owner can safely check three things: lift a corner paver with a flat pry bar to inspect bedding sand depth (should be 1″ of coarse concrete sand), verify that edge restraints are still pinned to the compacted base, and confirm downspouts discharge at least 6 feet from the pavement edge. These checks tell you whether the failure is superficial or structural.

Where DIY goes wrong is in the base repair. Removing and re-laying pavers without recompacting the aggregate base in 6-8″ lifts with a plate compactor guarantees recurrence within two seasons. For Tamko systems with vehicular loading, the base needs 95% modified Proctor density, which requires equipment most Cupertino homeowners do not keep. Call (669) 202-9618 to schedule your free estimate. We’ll assess the base, name the price in writing, and show you the photo documentation you’ll receive before we start.

FAQs